Refinishing Hardwood Floor: A How to Guide

If you are planning to get started refinishing hardwood floor, there are a few things that you are going to want to be aware of, to ensure that you get the best results.

Hardwood floor installation and maintenance does not have to be difficult, but here are a few tips that you will want to keep in mind.

How to Refinish Your Hardwood Floor

If you are interested in refinishing hardwood floor, first and foremost you need to realize that refinishing hardwood floors is something that takes a lot of time and patience. This is not a job that you can rush, and so you are going to need to be aware of this and willing to take on the task.

First you are going to need to gather together the materials you are going to need for the job of refinishing hardwood floor. This would include such things as wide brooms, heavy and light sandpaper, gloves, rollers with long handles, floor wax or polyurethane finish, brushes, dust masks, wood stain, rags, floor sanders and edgers, and shop vacuums.

Anything else that you can think of you will want to get together as well, and ensure that you have everything you need for refinishing hardwood floor ready to go so that you don’t get halfway through the job only to realize that you are missing an important tool.

All you need to do now is to get started on actually refinishing hardwood floor. You will need to check the floor for nails and other protrusions, so that the floor will be completely evened out in the end. Get a floor sander and buff down the existing floors, and then you need to stain the floor.

There are various different colors of wood floor stain available these days, and you may even end up deciding that you would prefer to leave the floor natural in tone, in which case you simply need to apply a finish.

Finishing the floor is quite easy, and all you need to do is stir the container of polyurethane finish, making sure that you mix it properly, as shaking it will create air bubbles that will stay in the final finish and throw the whole look off. You want to apply the polyurethane with a brush or roller, and make sure that you are stroking evenly back and forth, never in straight lines because this may end up showing up, leaving a streaky effect.